C2134 OBD Code

C2134 = Chassis Code (Problem is controller area network wiring bus and modules.)

34 is the final two digits are numbers that relate to the specific fault description, and there is no pre-approved key to help decode these final two digits.

C2134 OBD Code Description :

C2134 Structure Identification

C refer to the chassis category, which deals with areas outside the passenger compartment. It covers functionalities, such as brakes, suspension, steering, and mechanical systems.
2 Pump Motor Circuit Malfunction
1 Park Switch Circuit High
3 Level Control Compressor Relay Malfunction
4 LF Normal Force Malfunction

Possible Causes

  • CAN data bus wires have short circuited to each other
  • HO2S signal and ground circuit wires crossed in wiring harness
  • MAF or MAP
  • Position actuator circuit may short to B+ or Ground
  • TACM wiring harness connector is damaged or open

How is the C2134 code repair?

For repair process you can do it yourself or take the car to auto repair shop , it will charge between $50 and $150 per hour.

Before starting repair process please check the 5 possible causes and to diagnose the C2134 obd2 code nearly half an hour labor time.

OBD2 Code Structure

First unit identifies the type of obd error code:

Pxxxx for powertrain
Bxxxx for body
Cxxxx for chassis
Uxxxx for class 2 network

Second digit shows whether the code is manufacturer unique or not:

x0xxx for government-required code
x1xxx for manufacturer-specific code

Third digit shows us what system the trouble code references:

xx1xx/xx2xx show air and fuel measurements
xx3xx shows ignition system
xx4xx shows emissions systems
xx5xx references speed/idle control
xx6xx deals with computer systems
xx7xx/xx8xx involve the transmission
xx9xx notates input/output signals and controls

Digits four and five show the specific failure code.

xxx00 to xxx99 - these are based on the systems defined in the third digit.


About | Contact | Privacy

Copyright © 2020 All rights reserved.

OBD Code